Selecting Step Keys - G&D DVIMUX8-OSD-USB Installation Und Bedienung

Configuration
How to disable/enable the mouse support to operate the On-Screen Display:
1. Press Ctrl+Num
2. Press F1 to open the menu.
3. Use the Arrow keys
4. Use the Arrow keys
lowing options:
No: OSD cannot be opened by mouse
Yes: OSD can be opened with mouse keys
5. Press F1 to save your settings.

Selecting step keys

If the Stepscan mode (see page 16 ff.) is active, you can access the previous or the
next computer by pressing a key.
In the default configuration of the KVM switch the
for accessing the computers. However, you can change these keys according to your
needs.
How to select the keys to use the Stepscan function:
1. Press
Ctrl+Num
2. Press to open the menu.
F1
3. Use the
Arrow keys
4. Use the
Arrow keys
ing options:
Up Dwn:
PgUp PgDwn:
NUM Up Dwn:
NUM PgUp PgDwn:
Num + -:
Explorer mouse
NOTE: If you access the On-Screen Display by mouse, you cannot use Micro-
soft's »IntelliMouse Explorer« or another compatible mouse when performing
the Stepscan function (see page 39).
5. Press F1 to save your settings.
39 · G&D DVIMUX8-OSD-USB
(standard) to open the On-Screen Display.
to select Console Setup
to select OSD by mouse
(standard) to open the On-Screen Display.
to select
Console Setup
to select
Stepkeys
Arrow and Arrow
Pg Up and Pg Dn
and
Arrow Arrow
Pg Up and Pg Dn
and
Plus Minus
Keys and
4 5
and press Enter
and press Space
and keys of a compatible mouse
4 5
Arrow
, and press
Enter
and press to choose one of the follow-
Space
keys
keys
keys of numeric keypad
keys of numeric keypad
keys of numeric keypad
.
to select one of the fol-
und keys are used
Arrow
.