Weldeye With Dcm (Optional) - Kemppi X5 FastMig Bedienungsanleitung

When using WiseSteel, different adjustment methods are applied at different power ranges (different arcs). The wire
feed speed / current indicator shows the arc range: Short arc — Globular arc — Spray arc.
Short arc range:
• WiseSteel is based on adaptive short arc control; that is, the process adjusts the short circuit ratio. This creates an
easily-adjustable arc and less spatter. Within the short arc range, the shape of the current is similar to the tra-
ditional short arc welding. When a short arc is used in vertical up welding where weaving motion is applied,
WiseSteel ensures good quality through adapting to the changes in the stick-out length.
Globular arc range:
• Globular arc means that WiseSteel fluctuates the power between short arc and spray arc at a low frequency, so
that the average power stays within the globular arc range. This results in less spatter than conventional glob-
ular arc welding, and a welding pool that enables excellent structural durability.
Spray arc range:
• Within the spray arc range, WiseSteel is based on adaptive arc length control, which keeps the arc optimally
short. WiseSteel also utilizes micro-pulsed welding current. This creates a well-formed weld pool that enables
excellent bead geometry and optimal penetration with smooth and durable joints, and speeds up the work. The
pulsing is not noticeable to the welder. The shape and control of the current are close to the conventional spray
arc welding.
For more information on Wise products, visit www.kemppi.com.

3.4.5 WeldEye with DCM (optional)

Kemppi's WeldEye welding management software is also available for use with X5 FastMig. For this, an additional
Digital Connectivity Module (DCM) device is required. It is connected directly to the X5 FastMig's control connection
with the cables and adapters delivered with the DCM device. DCM can be connected either to the wire feeder's or to
the power source's control connection.
For more information on installing and using the DCM device, refer to
Discover WeldEye – universal welding management software
WeldEye is your primary tool and storage space for keeping your welding-related documents in order. WeldEye is a
universal solution for managing welding production.
© Kemppi
userdoc.kemppi.com
84
X5 FastMig
Operating manual - EN
(DCM/WeldEye).
1920960 / 2039