Kemppi X5 FastMig Bedienungsanleitung Seite 79

4. MIG only: Use the filter options (e.g. material, wire material or wire diameter) to find the welding programs best
suited for the purpose.
The operation mode set in the panel
In MIG mode, the Process selection in the Create channel view allows to narrow down the search more specifically to
different MIG processes.
5. MIG only: Once ready, go to the Welding program selection at the bottom to view the suitable welding pro-
grams.
6. MIG only: Select a welding program.
>> The selected welding program is now shown in the filter view.
© Kemppi
Settings determines for which main welding process the programs here are shown.
80
X5 FastMig
Operating manual - EN
1920960 / 2039