You access the menu with the appliance's other functions by means of the PROG button from the drinks selection screen. For
all settings, the rotating button enables you to navigate through the menus and options and to confirm a choice, while the PROG
button enables you to cancel a selection and return to the drinks selection menu.
PROG
MAINTENANCE
All of these options enable you to start the selected programmes. You should then follow the on-screen instructions.
MAINTENANCE
SETTINGS
SETTINGS
Coffee temperature
OTHER FUNCTIONS: PROG BUTTON
Maintenance
Settings
Product information
Rinsing
Coffee cleaning
Cappuccino cleaning
Language
You can select the language of your choice from those offered.
Screen contrast
You can adjust the screen contrast according to your preferences.
You must set the date, particularly when you are using an anti-limescale
Date
cartridge.
Clock
You can select to display a 12 or 24-hour clock.
You can select the length of time after which your appliance will switch off
Auto-off
automatically.
From 30 minutes to 4 hours, in 30 minute segments.
You can automatically start pre-heating of the appliance at a selected
Auto-on
time.
Automatic rinsing
You can automatically start rinsing of the appliance when it is switched on.
Volume unit
You can set the unit of measurement to be ml or oz.
You must set the hardness of your water between 0 and 4. See the
Water hardness
section "Measuring the water hardness".
You can adjust the temperature of your espresso or coffee to one of three
levels.
Exit
Takes you back to the previous menu.
Enables you to access the various maintenance
options.
Enables you to access the various settings
options.
Enables you to access product information.
Exit
Takes you back to the previous menu.
Enables you to access the rinsing operations.
Enables you to access the cleaning operations.
Filter
Enables you to access filter mode.
Exit
Takes you back to the previous menu.
Enables you to access the cappuccino system
cleaning operations.
27