Anatomy The Helmet; Outer Shell; Inner Shell - SCHUBERTH M1 PRO Bedienungsanleitung

C. THE HELMET
3. ANATOMY OF THE HELMET
Face shield
Finger-Tab
Sun visor
Loudspeaker
Microphone
Chin strap with
ratchet strap
Ratchet lock

4. OUTER SHELL

The outer shell of the M1 PRO helmet combines an aerodynamically optimal
shape with consistent protection. It consists of a special glass-fibre reinforced
duroplastic matrix developed by SCHUBERTH, which gives the helmet the high
level of strength needed for your protection.
Caution:
The safety helmet is designed to absorb the effects of only one impact.
The helmet must be replaced after a fall, accident or any other impact.

5. INNER SHELL

For optimised impact absorption properties, the inner shell of the helmet
consists of several components. The complex multi-segment foam padding of
the main body provides better absorption and dissipation of impact forces and
gives you the highest level of safety. The large side panels ensure the helmet
sits optimally and comfortably.
40
Ventilation regulator
Inner shell
Reflectors
Face shield
mechanism
Outer shell
Inner lining
Retention system
(with anti-roll-off
system)
Slider for the sun
visor