Assembly; Unpacking - Dirt Devil Infinity V12 eco Star Collection Bedienungsanleitung

2 Assembly

2.1 Unpacking

2 Assembly
2.2 Assembly
2
1
Fig. 2
1
3
2
Fig. 3
1
a
Fig. 4
Unpack the appliance and all accessory parts and check
that the contents are complete. Information regarding
scope of delivery Zpage 22, "Overview of your Infinity V12
eco".
ATTENTION:
Always transport/send the appliance in its original pack-
aging to avoid transport damages. Keep the packaging
for such an event.
Dispose of no longer needed packaging material accord-
ing to the applicable regulations of your country.
NOTE:
Immediately contact your dealer if you have found dam-
age resulting from transport.
WARNING:
Danger of injury! Only assemble the appliance when it is
not connected to the mains. It could be switched on acci-
dentally.
1. Insert the suction-hose adapter (Fig. 2/1) into the suc-
tion-hose connection (Fig. 2/2) and lock it in place by
turning clockwise to the stop.
2. Insert the handle (Fig. 3/1) into the upper end of the tel-
escopic tube (Fig. 3/2).
3. Attach the floor nozzle (Fig. 3/3) to the bottom end of
4
the telescopic tube (Fig. 3/4).
NOTE:
It might be necessary to press a bit harder or to twist the
two parts against each other when putting them together
in order to firmly join them.
4. Adjust the length of the telescopic tube. To do this,
press the telescopic tube lock (Fig. 4/1) forward
(Fig. 4/a). Then pull the handle of the telescopic tube to
b
extend it to the desired length (Fig. 4/b). To lock it in
place, let go of the release catch while pulling. You will
hear a distinct click.
Your vacuum cleaner is now ready for use.
27