How To Use - Seiko 4R35 Bedienungsanleitung

● Check the type of the crown of your watch
The crown
turns.
Turn the
crown
clockwise.
The crown
does not
turn.
* If your watch has a screw-lock crown, the crown will screw into the watch case
for added protection.
• After completing all settings of the watch, screw the crown in again by turn-
ing it clockwise while pressing it.
• If the crown turns out to be too stiff to be screwed in, turn the crown coun-
terclockwise once and then give another try.
• Do not screw it in by force as it may damage the slots of the crown.
8
The crown of your watch is
the screw lock type.*
Go to
To set the watch
"HOW TO
USE"
Unscrew the crown by turning it
counterclockwise.
Unscrew.
Screw up.

HOW TO USE

This watch is an automatic watch equipped with a manual winding mechanism.
• When the watch is worn on the wrist, the motion of the wearer's arm winds the
mainspring of the watch.
• If your watch is completely stopped, it is recommended that you manually wind
the mainspring by turning the crown.
● How to manually wind the mainspring by turning the crown
60
30
• The winding operation for 4R35, 4R36, 4R37, 4R38 and 4R39 are the same.
1. Slowly turn the crown clock wise (in
the 12 o'clock direction) to wind the
mainspring.
Turning the crown counterclockwise (the
6 o'clock direction) does not wind the
mainspring.
2. Continue to turn the crown until the
mainspring is sufficiently wound.
second hand will start moving.
3. Set the time and date before putting the
watch on your wrist.
The
9