Maintenance; Cleaning Of Surfaces; Cleaning The Filters - Teuco P013A Serie Gebrauchsanweisung

EN

CLEANING OF SURFACES

Refer to the CLEANING INSTRUCTIONS manual accompanying the product .

CLEANING ThE FILTERS

CLEANING ThE pREFILTER
During normal use of the filtration system, dirt will collect
in the prefilter of the filter pump .
Shut off the filter pump by setting the switch on the
control panel to the "STOP" position .
Close the valve on the inlet side of the filter pump
(installed by the contractor) .
Unscrew the filter housing collar; remove the basket and
clean out debris .
Replace the basket in the housing, making certain it is
positioned correctly .
Having secured the transparent cover, reopen the pump
inlet valve .
Start the filter pump by setting the switch to "MAN",
bleed the sand filter (see step 10 of STARTING FIRST
TIME), then return the switch to the "AUTO" position .
Nb: ThE pROCEDURE FOR ACCESSING ThE pRE-
FILTER MAy DIFFER SLIGhTLy FROM ONE TypE/
MODEL OF pUMp TO ANOThER.
26

MAINTENANCE