0 - During periods when the pool is not in use, set
EN
the selector valve to the intermediate position
indicated by "OFF".
MINIpOOL CANvAS
Always keep the minipool protected when not in use
by fitting the cover provided to reduce heat loss and
evaporation, as well as to prevent the water from
becoming dirty and above all, for safety reasons, if
the pool is left with water inside .
The cover needs to be secured using the straps and
if necessary, locked for increased safety .
The cover is not designed to take any weight.
Never sit down, walk or lie upon the cover.
Do not place any items on the cover.
The cover may represent a hazard if not secured
or properly closed.
Do not follow the fastening instructions for the
cover when the pool is left with water inside, as
this could represent a hazard.
Always remove the cover completely before
entering the minipool; there is a risk of becoming
stuck.
we recommend that at least two people carry out
thermal cover removal operations. The cover
must only be lifted and carried by its special
handles.
41