Set Time / Date; Setting The Duration Of The Whirlpool Session - Timer - Teuco P013A Serie Gebrauchsanweisung

EN

SET TIME / DATE

Press the "Menu/OK" key on the control panel until a list
of functions is shown on the display .
By pressing the keys ▲ and ▼ ▼, select the writing
"G/M modification" .
When selecting the writing, it starts blinking .
Press "Menu/OK" key to access .
Using the keys ► and ◄, select the value to be
modified. Through the keys ▲ and ▼ set the required
value and press "Menu/OK" to confirm and return to the
main menu .
Should deviations occur between the minipool clock and
another one for reference over time, a calibration can be
carried out by changing the frequency of the inner clock
Set the "CAL" (calibration) value inserting the value,
expressed in seconds, corresponding to the deviation
between the two clocks occurred in a six-month period .

SETTING ThE DURATION OF ThE whIRLpOOL SESSION - TIMER

The procedure for setting duration of whirlpool session
is listed hereunder:
1) Press OK/MENU button
2) Select the PARAMETER line through the arrows
▲▼
3) Press OK/MENU button
4) Move the blinking cursor to the whirlpool session
duration time through the arrow ►
5) Set the required whirlpool session duration
between 15 and 30 minutes with the arrows ▲▼
6) Press OK/MENU button
7) Select the line YES with the arrows ▲▼ to confirm
the new setting, otherwise select NO and enter a
new value to continue .
8) Press OK/MENU button
26
00:00 01/03/2015
XXXXXXXXXX
MODIFICA G/M
XXXXXXXXXX
CC9 CONTATORE
RC9 C9V=+0000
C9
XXX P=0027