Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BCM R15E-00 DI00 S4 Serie Betriebsanleitung

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
1

Notes to the user

1.1 Validity
These instructions describe the construction, function and
configuration options of the BCM Condition Monitoring
Sensors with IO-Link interface. It applies to models
BCM R15E-001-DI00-_ _ , _-S4 and
BCM R15E-002-DI00-_ _ , _-S4.
The guide is intended for qualified technical personnel.
Read these instructions before installing and operating the
BCM.
1.2

Symbols and conventions

Individual actions are indicated by a preceding triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Digits without further identification are decimal numbers
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB). Binary numbers are displayed
with a preceding 0b (e.g. 0b10).
Note, tip
This symbol indicates general notes.
1.3

Scope of delivery

– BCM Condition Monitoring Sensor
– Condensed guide
www.balluff.com
1.4

Approvals and markings

Only for NFPA 79 applications.
We confirm conformity with the
applicable EU Directives with the CE
marking.
The BCM meets the requirements of the following product
standard:
– EN 61326-2-3 (noise immunity and emission)
Emission tests:
– RF emission
EN 55011
Noise immunity tests:
– Static electricity (ESD)
EN 61000-4-2
– Electromagnetic fields (RFI)
EN 61000-4-3
– Electrical fast transients (burst)
EN 61000-4-4
– Conducted interference induced by
high-frequency fields
EN 61000-4-6
The current version of the CE declaration of
conformity and additional documents are
available at www.balluff.com.
1.5

Abbreviations

MEMS Micro-electromechanical Systems
RMS Root Mean Square
PLC Programmable Logic Controller
Severity level 2
Severity level 3
Severity level 4
Severity level 3
english 5