Notes To The User; Other Applicable Documents; Symbols And Conventions; Explanation Of The Warnings - Balluff IO-Link BES M12MG1-YIC60B-S04G Betriebsanleitung

BES M12M_1-YIC_0_-S04G
Inductive sensors
1

Notes to the user

1.1 Validity
This guide provides all the information necessary for safe
use of the BES inductive sensor with analog current and
voltage as well as IO-Link interface. It applies to the
following models:
– BES M12MG1-YIC60B-S04G
Order code: BES05T2
– BES M12MD1-YIC60B-S04G
Order code: BES05T3
– BES M12MF1-YIC10F-S04G
Order code: BES05T8
– BES M12MC1-YIC10F-S04G
Order code: BES05T9
Read this guide and the other applicable documents
completely before installing and operating the product.
1.2

Other applicable documents

Additional information about this product can be found at
www.balluff.com on the product page, e.g. in the
following documents:
– Data sheet
– Declaration of Conformity
– Disposal
1.3

Symbols and conventions

Individual action instructions are indicated by a preceding
triangle.
► Instruction 1
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
Numbers unless otherwise indicated are decimals
(e.g. 23). Hexadecimal numbers are represented with a
preceding 0x (e.g. 0x12AB).
Note, tip
This symbol indicates general notes.
www.balluff.com
1.4

Explanation of the warnings

Always observe the warnings in these instructions and the
measures described to avoid hazards.
The warnings used here contain various signal words and
are structured as follows:
SIGNAL WORD
Type and source of the hazard
Consequences if not complied with
► Measures to avoid hazards
The individual signal words mean:
NOTICE
Identifies a danger that could lead to damage to or
destruction of the product.
DANGER
The general warning symbol in conjunction with the
signal word DANGER identifies a hazard which, if not
avoided, will certainly result in death or serious
injuries.
1.5

Scope of delivery

BES inductive sensor
The IODD can be found at www.balluff.com
on the product page.
1.6

Abbreviations

DIO Digital Input/Output
PD Process Data
SIO Standard Input/Output
english 5