Notes To The User; Symbols And Conventions; Scope Of Delivery; Approvals And Markings - Balluff BES Q08ZC-YPL20B-BP00,3-GS75 Betriebsanleitung

BES Q08ZC-YPL20B-BP00,3-GS_ _
Inductive Sensors
1

Notes to the user

1.1 Validity
This guide describes the construction, function and
configuration options for the inductive sensors of the BES
product family. It applies to the following models:
BES Q08ZC-YPL20B-BP00,3-GS75
–
Order code: BES05PK
– BES Q08ZC-YPL20B-BP00,3-GS04
Order code: BES05RW
This guide is intended for qualified technical personnel.
Read this guide before installing and operating the
magnetic field sensors.
1.2

Symbols and conventions

Individual instructions are indicated by a preceding
triangle.
► Instruction
⇒ Result of the action
Action sequences are numbered consecutively:
1. Instruction 1
2. Instruction 2
⇒ Result of the action
Note, tip
This symbol indicates general notes.
Numbers less otherwise indicated are decimals (e.g. 23).
Hexadecimal numbers are shown with the prefix 0x
(e.g. 0x12AB).
1.3

Scope of delivery

The following parts are included in the scope of delivery:
– Sensor
– Condensed guide
Cables and other accessories are available on
the Internet at www.balluff.com or may be
requested via e-mail from service@balluff.de.
4 english
1.4

Approvals and markings

The CE Mark verifies that our products
meet the requirements of the current
EU-Directive.
For use only in the secondary of a Class 2
source of supply.
À utiliser uniquement sur le côté
secondaire d'une source de tension de
classe 2.
With the IO-Link label, we affirm that our
products meet the specifications of the
IEC 61131-9.
More detailed information on the guidelines,
approvals, and standards is included in the
declaration of conformity.