Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Setting timer
1.
Touch TIMER button to set the operating hours you desired (1 to 24 hours, the sign of
timer will light on). When the set time has been reached, the machine will turn off
automatically. The display window will show the hour(s) you set as you press TIMER
button. If the timer button is not pressed, the unit will work continuously.
2.
By touching the timer but without turning on the other functions, you can PRE-SET the
time for the machine to work. For example, if you press the timer to '2', the unit will work
automatically after 2 hours.
Sleep function
1.
In cooling mode, by pressing the SLEEP button, the set temperature will increase 1oC at the
1st hour, another 1 oC at the second hour, then keeps at that temperature.
2.
In sleep mode, the ventilation will keep at low speed. Re-press the SLEEP button, the setting
temperature and ventilation speed will return to the pre-selected one.
3.
The unit will shut down automatically after the SLEEP function running for 12 hours.
4.
Please note, the sleep function is not available while the machine is working in ventilation,
dehumidification or auto mode. Only available in Cooling mode.
5.
When the machine is in Sleep function, the Fan Speed would turn to be LOW speed.
Dehumidify (DRY) mode
In dehumidify (DRY) mode, the temperature cannot be adjusted, the ventilation will fix at low
speed. When the unit is operating in Dehumidify ( DRY) mode, humidity extracted from the air
is collected in an internal tank. If the tank reaches full, the compressor and motor cut out
automatically. At the same time, the "Water Full" indicator comes on. An alarm will also sound.
When the tank is full, drain the water as shown in the page concerning "DRAINAGE". You may
also use the unit without having to empty the tank so often by using "continuous drainage",
please also refer to the page about "DRAINAGE".
rspro.com
14
Werbung
Inhaltsverzeichnis
