Monitor Settings - Blackmagic Design URSA Mini series Installations- Und Bedienungsanleitung

Still image files captured using the still button will follow the file naming convention for video
clips, however the filename will have an 'S001' representing the 'still number' as the last four
digits of the filename in place of the clip number. Stills will be recorded as a DNG file to the stills
folder. For more information, refer to the 'Status LCD Controls' section in this manual.

Monitor Settings

The 'monitor' tab lets you adjust status text, overlays, and other monitoring options for your
URSA Mini's LCD touchscreen, front and main SDI outputs. Options are arranged by output
between 'LCD', 'front SDI' and 'main SDI', as well as 'all,' which covers monitor settings that
affect all outputs on your URSA Mini. Each of these menus has two pages of options, which
you can cycle through by tapping the arrows at the edge of your camera's touchscreen,
or swiping left or right.
LCD, Front SDI, Main SDI Monitor Settings 1
The first page of the 'LCD,' 'front SDI,' and 'main SDI,' monitor tab contains identical settings for
each output. For example, you can set 'zebra' on for the LCD touchscreen, but off the front or
main SDI outputs.
Clean Feed
Tap the 'clean feed' switch in the 'LCD,' 'front SDI' and 'main SDI' menus to disable all status text
and overlays for that output, except the record tally indicator.
Your URSA Mini LCD touchscreen will still display a record tally in clean feed mode
NOTE LUTs will still be applied to outputs with 'clean feed' enabled. To disable LUTS,
disable the 'display LUT' switch in the 'Monitor' menu for that output.
Settings 93