Brionvega BV1 Bedienungshandbuch Seite 88

tapes, increasing the definition value.
Lastly, the SPORT selection can be set with medium-high
contrast and colour values, to enhance the field depth and to
obtain brighter colours.
If brightness and contrast are wrongly set in such a way
that the image on the screen is not visible, you must:
1. Change selection using button (11).
2. Go back to the wrongly adjusted selection: you will
find that the previous mistakes concerning brightness
and contrast levels are cancelled.
3. Select the new desired values.
Here is how to personalise the Nature selection by increasing
the brightness.
1. Enter the IMAGE menu by pressing MENU button (8) twice
or the GREEN (13) coloured button for direct access.
2. The IMAGE menu is displayed on the screen with the red
CURSOR highlighting the BRIGHTNESS function.
If the selections have not yet been personalised, you will
find all the adjustment levels halfway.
[B-10]
BRIGHTNESS
CONTRAST
COLOUR
DEFINITION
SELECTION
3. Position the red CURSOR on SELECTION by using but-
tons / (5).
[B-11]
BRIGHTNESS
CONTRAST
COLOUR
DEFINITION
SELECTION
4. Change the selection by using buttons - / + (7) until the
word "Nature" appears on the screen.
84
Downloaded from www.Manualslib.com
IMAGE
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
Cinema
IMAGE
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
Cinema
manuals search engine
[B-12]
IMAGE
BRIGHTNESS
CONTRAST
COLOUR
DEFINITION
SELECTION
5. Now any adjustments regarding Brightness, Contrast,
Colour, Definition shall be stored in the "Nature" selection.
6. Position the red CURSOR on BRIGHTNESS using buttons
/ (5).
[B-13]
IMAGE
BRIGHTNESS
CONTRAST
COLOUR
DEFINITION
SELECTION
7. Adjust the brightness by using the buttons - / + (7).
During this operation only the selected function is dis-
played on the screen.
[B-14]
BRIGHTNESS
Keep the button + pressed if you want to increase the
BRIGHTNESS. Keep the button - pressed if you want to
decrease the BRIGHTNESS.
8. After approximately two seconds the entire IMAGE menu
will appear on the screen. It is now possible to modify the
other functions of the "Nature" SELECTION, for example
Contrast. (repeat point 6 by moving the cursor to CON-
TRAST, repeat point 7 if you want to increase contrast).
9. Return to TV mode by pressing button (14) or wait for 7
sec.
When you exit the IMAGE menu the NATURE selection will
be automatically memorised with the newly set Brightness
value.
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
Nature
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
IIIIIIIIIIIIIIIIIIIIIIIIIIII
Nature
IIIIIIIIIIIIIIIIIIIIIIIIIIII