Potential Free Contact - Miele DSM 400 Funktionsbeschreibung/Montageanweisung

en – Electrical connection

Potential free contact.

(connection must be made a suitably
qualified electrician only)
^ Before connecting to an additional
light switch the lid of the control
module has to be taken off. It is
refitted later.
^ Terminal a must be bridged.
8
Potential free contact can be accessed
using terminal c on the control module.
This enables another appliance to be
controlled according to the switch
setting on the cooker hood fan.
Contact c supplies no defined voltage
(it is potential free). It can be used
universally.
The maximum operating load of the
contact is 230 V / 2 (1) A.
The contact closes when the On/Off
touch control on the cooker hood is
operated. The On/Off button indicator
light and the second indicator light for
the fan setting will come on.
If in any doubt, the advice of a
competent builder or, for gas, a Gas
Safe registered installer must be
sought.
After the installation is completed, a
safety check must be carried out in
accordance with national and local
regulations (e.g. VDE 0701-1).