Dell PowerVault NX1950 Installationsanleitung Seite 14

Accessing the SAC Command Prompt
SAC is the primary EMS CLI environment hosted by Windows Unified
Data Storage Server 2003 operating systems. It is separate from the CLI
environment and provides different functionality.
SAC is available immediately after you turn on the system. You can use
SAC to manage the server during normal system operation and to initiate
most of the Windows Unified Data Storage Server 2003 operating system
components. You can also use the SAC when the system is in Safe Mode
and during GUI-mode setup. When EMS is enabled, SAC remains active
as long as the kernel is running.
You can access SAC using a serial cable between the storage server and
a portable system, along with a terminal emulation program such as
HyperTerminal, to connect to the server.
software for terminal emulation. For more information, see "Selecting client
terminal software for Emergency Management Services" on the Microsoft
website at http://go.microsoft.com/fwlink/?LinkId=66418.
To access the SAC command prompt:
1 Start the terminal emulation program and connect to the serial port.
2 Open Windows Unified Data Storage Server.
3 After EMS starts, at the SAC prompt, type cmd and press <Enter>
to create a command prompt window.
4 To switch the channel window to view the output of the command
prompt, type ch -sn cmd0001 and press <Enter>.
5 Log on as Administrator.
For more information about using SAC, see "Using Emergency
Management Services" on the Microsoft website at
http://go.microsoft.com/fwlink/?LinkId=66415 or see Windows Unified
Data Storage Server 2003 Help.
12
Downloaded from www.Manualslib.com
NOTE:
To access EMS remotely, ensure that you are using compatible client
NOTE:
The default password for your system is storageserver.
Installation Guide
manuals search engine