Accuracy; Mechanical Features - JUMO Wtrans p Betriebsanleitung

7.5

Accuracy

Relative and absolute pressure
Measuring range
a
Linearity
b
Accuracy at 20 °C
c
Accuracy at -20 to +80 °C
Relative and absolute pressure
Measuring range
a
Linearity
b
Accuracy at 20 °C
c
Accuracy at -20 to +80 °C
Relative pressure
Measuring range
a
Linearity
b
Accuracy at 20 °C
c
Accuracy at -20 to +80 °C
Relative pressure
Measuring range
a
Linearity
b
Accuracy at 20 °C
c
Accuracy at -20 to +80 °C
d
Long-term stability
a
Linearity after limit point setting
b
Includes: linearity, hysteresis, repeatability, deviation of measuring range initial value and measuring span (MSP)
c
Includes: linearity, hysteresis, repeatability, deviation of measuring range initial value and measuring span (MSP),
thermal effect on measuring range start and measuring span (MSP)
d
EN 61298-1
7.6

Mechanical features

Case material
Case seal material
Pressure sensor material
Process connection material
Installation position
Weight
The measuring ranges begin at 0 bar.
0.25 0.4 0.6
0.3 0.3 0.3
0.7 0.7 0.6
2.0 1.8 1.8
The measuring ranges begin at 0 bar.
10 16 25
0.25 0.2 0.2
0.5 0.5 0.5
1.0 1.0 1.0
The measuring ranges begin at 0 bar.
40 60 100
0.2 0.2 0.2
0.5 0.5 0.5
1.0 1.0 1.0
The measuring ranges begin at -1 bar.
-1 to 0 -1 to +0.6 -1 to +1.5
0.3 0.3 0.3
0.5 0.5 0.5
1.3 1.3 1.2
< 0.2 % of MSP
PA, transparent (UV-resistant)
VMQ
Stainless steel 17-4 PH (1.4548)
for 0 to 160 bar, 0 to 250 bar, 0 to 400 bar, and 0 to 600 bar;
stainless steel 316L (1.4435)
for all other pressure ranges
Stainless steel 316Ti (1.4571);
stainless steel 316L (1.4435) with roughness Ra < 0.8 μm for JUMO PEKA with
EHEDG certification
Any (with due consideration of the application)
Approx. 250 g (with lithium battery and process connection 504: G 1/2 DIN EN 837)
1 1.6 2.5
0.3 0.25 0.25
0.5 0.5 0.5
1.3 1.3 1.2
160 250 400
0.3 0.3 0.3
0.7 0.7 0.7
1.2 1.2 1.2
-1 to +3 -1 to +5 -1 to +9
0.3 0.25 0.25
0.5 0.5 0.5
1.2 1.2 1.0
7 Technical data
4 6 bar
0.25 0.25 % of MSP
0.5 0.5 % of MSP
1.2 1.2 % of MSP
bar
% of MSP
% of MSP
% of MSP
600 bar
0.3 % of MSP
0.7 % of MSP
1.2 % of MSP
-1 to +15 -1 to +24 bar
0.25 0.2 % of MSP
0.5 0.5 % of MSP
1.0 1.0 % of MSP
37