Technical Data; Declaration Of Conformity - Schwamborn DSM 250 Originalbetriebsanleitung

EN Floor grinding machine DSM 250

7 Technical data

7 Technical data
Type
Rated voltage
Rated frequency
Rated current
Rated power
Tool speed
Protection rating
Dust extraction
Dimensions (L x W x H)
Working width
Grinding head weight
Total weight
Noise level
Vibration total value*)
*) Determined under standardised manufacturer operating conditions according to the HARM measuring
method.

8 Declaration of conformity

Schwamborn Gerätebau GmbH
Robert‐Bosch‐Straße 8
D‐73117 Wangen
Germany
We hereby declare that the machine
DSM 250
complies with the provisions described in
— Directive 2006/42/EC
Machine
— Directive 2004/1 08/EC
Electromagnetic Compatibility
— Directive 2006/95/EC
Low Voltage
The following harmonised standards apply:
— EN 292‐1, EN 292‐2, EN 13857
Safety of Machinery
— EN 60204‐1
Electrical Equipment of Machines
— EN 50081‐2/EN 50082‐2/EN 61000‐6‐2
Electromagnetic Compatibility
20
DSM 250 DSM 250 (400V)
230 V, 1
50 Hz
13,2 A
2,2 kW
1400 rpm
1000 x 400 x 1000 mm
35 kg
56 kg
It is forbidden to begin operating a modified or retro­
fitted machine before it has been determined that the
modified or retrofitted machine conforms to the above
directives.
This declaration is no longer valid if the machine is
modified or retrofitted without our prior consent and
approval.
Wangen, 1.5.2017
Eckart Schwamborn
Managing Director
DSM 250 (220V)
400 V, 3
6,2 A
IP23
 50 mm
250 mm
30 kg
53 kg
79 dB
2
<2,5 m/s
220 V, 1
60 Hz
10,3 A
1,5 kW
1150 rpm
35 kg
56 kg