Weight Rack; Task Spotlight; Lights; Attachment Flange "Adapter - Rapid 1700 Original Bedienungsanleitung

6.7

Weight rack

EN
6.8

Task spotlight

6.9

Lights

6.10

Attachment flange "Adapter"

228
The weights on the weight rack are used for optimum machine balancing and increase the
traction of the wheels.
Heavy attachments increase the lifting force on the handlebar. Ballast weights on the weight
rack can reduce the lifting force.
In the case of 5 weights (1), they are directly mounted on the weight rack (2) and clamped
with the star grip (3). The retaining spring (4) is not required in this case.
If there are less than 5 weights (1), either the weight rack plate (5) can be adjusted so that
the weights are lying directly on the weight rack or the retaining spring (4) is used as a
support for the weights, in which case the weights are in the uppermost position. The
weights are clamped with the star grip (3).
1
3
5
4
• Use no more than 5 ballast weights of 8.5 kg each on the weight rack.
The task spotlight provides good workplace illumination.
The lateral and vertical position of the task spotlight can be adjusted using the flexible
fastening, meaning that the workplace can be well illuminated.
The lights on the left and right of the handlebar can be used as work lighting.
The national road traffic regulations must be observed.
Attachments made by AGRIA or Vogel & Noot can be attached to the machine with an
AGRIA or Vogel & Noot attachment flange.
Insert attachment flange into machine connections and secure with the device locking
mechanism. Then the attachment made by the above-mentioned manufacturer can be
attached.
2
Note
Note
Machine No. from 10005200