Pairing An External Device; Cancel Pairing - TechniSat DIGITRADIO 370 CD IR Bedienungsanleitung

11.2 Pairing an external device

To pair an external device, for example a smartphone or tablet, with the DIGITRADIO
370/371 CD IR, follow these steps:
> Start Bluetooth mode as described in Section 11.1.
> The display will show [Bluetooth] and [Please pair].
> Now start the search for Bluetooth devices nearby on your external device.
You may need to enable the Bluetooth feature on your external device first.
Please refer to the operating instructions for your external device to activate
the Bluetooth function and perform a search on your external device.
During the pairing process, both devices should be within 10 cm of each other.
> The entry DIGITRADIO 370/371 CD IR should now appear in the list of
Bluetooth devices found on your external device. Tap on the name of the
radio to complete the pairing process. If the pairing process has completed
successfully, Connected appears in the display.
> You can now start playing music on your external device.
Depending on the Bluetooth protocol of your external device, you can control
the music playback using the playback buttons on the remote control.
Playback / pause
Next track
Previous track
Track from beginning
Stopping playback
Alternatively, you can use the playback control for the music App on your
external device.
If no sound is being played, or no device is paired, the DIGITRADIO 370/371 CD
IR switches to standby mode after approx. 15 minutes.

11.3 Cancel pairing

> Hold down the PRESET button (12) on the DIGITRADIO 370 CD IR to cancel an
active pairing.
> Alternatively, you can cancel the pairing on your external device. Follow the
instructions in the device manufacturer's instruction manual.
70
- button
- button
- 2 x button
- button
- button