Overwriting/Deleting A Station Memory Slot; Internet Radio; Station List; Last Listened To - TechniSat DIGITRADIO 370 CD IR Bedienungsanleitung

8.9 Overwriting/deleting a station memory slot

> Simply save a new station in the respective memory slot as described.
When retrieving the factory settings all memory slots are deleted.

9 Internet radio

The DIGITRADIO 370/371 CD IR is equipped with an Internet radio receiver. In order
to receive Internet radio stations/channels, you need an Internet connection using a
connection to a wireless network via a WLAN router.
> Press the MODE button as often as required until [Internet Radio] is shown on
the display.
If you start the Internet radio mode for the first time without having
configured a WLAN connection during the initial set-up, the search wizard
appears showing you all the WLAN stations within range. Use the ENTER
button to select the WiFi network you recognise and enter the relevant
password using the displayed keyboard (skip WPS). Then select
press the ENTER button. If the password entered is correct a connection to the
network is now established. The signal bar
indicates whether the connection has been established. To cancel the entry,
select
delete the last letter entered using

9.1 Station list

> Press the MENU button and select the >Station list item.
Under Station list, all Internet radio stations are displayed, sub-divided into
different categories.
> Based on a category/country/genre, select a station and press the OK button.

9.2 Last listened to

> Select MENU > Station list > Timeline, to display a list of the last stations
listened to.
> Select a station using / and play it by pressing ENTER.

9.3 Adding favourites

The station memory can save up to 20 stations in the Internet radio range.
> In order to store this station in a memory slot, hold down the PRESET button
while playing until [Save Channel] appears in the display. Then use the /
buttons to select a favourites memory slot (1 - 20). Press the ENTER button to
save.
68
and press the ENTER button. If you make a typing error you can
in the status bar of the display
.
and