Attribute 0X01, Status; Attribute 0X02, Configuration Capability - TR-Electronic LE-25 Benutzerhandbuch

7.7.3.1 Attribute 0x01, Status

The Status attribute is a bitmap and indicates the status of the TCP/IP network
interface:
Bit Function
0-3
4
5
6
7-31 Reserved

7.7.3.2 Attribute 0x02, Configuration Capability

The Configuration Capability attribute is a bitmap that indicates the device's
support for optional network configuration capability:
Bit Function
0
1
2
3
4
5
6
7
8-31 Reserved
Printed in the Federal Republic of Germany
06/15/2020
Interface Configuration
Status
Mcast Pending
Interface Configuration
Pending
AcdStatus
BOOTP Client
DNS Client
DHCP Client
DHCP-DNS Update
Configuration Settable
Hardware Configurable
Interface Configuration
Change Requires Reset
AcdCapable
TR - ELE - BA - DGB - 0031 - 01
Description
The Interface Configuration attribute has not
0:
been configured.
The Interface Configuration attribute contains
1:
valid configuration (DHCP, FLASH)
The Interface Configuration attribute contains
2:
valid configuration (hardware switches)
3-15: Reserved
Indicates a pending configuration change in
the TTL Value and/or Mcast Config attributes.
This bit is set when either the TTL Value or
-
Mcast Config attribute is set, and is cleared
the next time the device starts.
No restart of the measuring system is
0:
required.
- not supported
0: -
Description
0 (FALSE): not supported
0 (FALSE): not supported
1 (TRUE): Device corresponds to a DHCP client
0 (FALSE): not supported
1 (TRUE): Device supports a variable configuration
1 (TRUE): Device uses hardware switches
0 (FALSE): changed network configuration is
immediate active
0 (FALSE): not supported
0
 TR-Electronic GmbH 2020, All Rights Reserved
Page 135 of 152