Bridge Function; Control Panel Locking; Cooking Advices; Pan Quality - Novy 1719 Montageanleitung Und Bedienungsanleitung

Bridge Function

This function allows the use of 2 cooking zones at the same time (left zones, middle zones, right
zones) with the same features as a single cooking zone. Booster function isn't allowed.
Action
Activate the hob
Activate the bridge
Increase bridge
Stop the bridge

Control panel locking

To avoid modification of the setting of the cooking zones , in particular during cleaning, the
control panel can be locked (with exception to the On/Off key [ 0/I ]).
Action
Locking the hob
Unlock the hob

COOKING ADVICES

Pan quality

Adapted materials : steel, enamelled steel, cast iron, ferromagnetic stainless-steel,
Not adapted materials : aluminium and stainless-steel without ferromagnetic bottom,
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles :
 Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This water
must heat in a few seconds.
 A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and doesn't influence the cooking operating.

Pan dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the centre of the cooking
zone.
Control panel
Press display [ 0/I ]
Press simultaneously on [ U ]
of the 2 cooking zones
Slide on the "SLIDER"
witch indicates the power
Press simultaneously on [ U ]
of the 2 cooking zones
Control panel
Press [
Press [
aluminium with ferromagnetic bottom.
cupper, brass, glass, ceramic, porcelain.
] during 6s
] during 6s
54
Display
[ 0 ]
[ 0 ] and [ ]
[ 1 ] to [ 9 ]
[ 0 ]
Display
locking light on
locking light off