Specifications - Makita 4326 Bedienungsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Length of stroke
Max. cutting capacities
Strokes per minute (min
Overall length
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-11:
Model 4326,4327
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Model 4328,4329
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
Model
Blade type
Wood
Mild steel
-1
)
Net weight
Safety class
) : 86 dB (A)
pA
) : 97 dB (A)
WA
) : 83 dB (A)
pA
) : 94 dB (A)
WA
4326 4327
18 mm 18 mm
65 mm 65 mm
6 mm 6 mm
3,100 500 - 3,100
217 mm 217 mm
(Steel base type) (Steel base type)
223 mm 223 mm
(Aluminum (Aluminum
base type) base type)
1.9 kg 1.9 kg
/II
WARNING:
Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can differ from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING:
Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
off and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-11:
Model 4326,4327
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model 4328,4329
Work mode : cutting boards
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Work mode : cutting sheet metal
Vibration emission (a
Uncertainty (K) : 1.5 m/s
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
5 ENGLISH
4328
18 mm
B type
65 mm
6 mm
500 - 3,100
217 mm
1.8 kg
/II /II
2
) : 5.5 m/s
h,B
2
2
) : 5.5 m/s
h,M
2
2
) : 7.0 m/s
h,B
2
2
) : 5.0 m/s
h,M
2
4329
18 mm
65 mm
6 mm
500 - 3,100
223 mm
1.9 kg
/II