Specifications; Specific Safety Rules - Makita 4350T Betriebsanleitung

ENGLISH
1 Cutting action changing lever
2 Switch trigger
3 Lock button
4 Speed adjusting dial
5 Tool opener
6 Blade clamp
7 Jig saw blade
8 Protrusions
9 Base
10 Hex wrench

SPECIFICATIONS

Model
Length of stroke............................................................. 26 mm
Max. cutting capacities
Wood .......................................................................... 135 mm
Steel ........................................................................... 10 mm
Aluminum ................................................................... 20 mm
Strokes per minute (min
Overall length ................................................................ 236 mm
Net weight ..................................................................... 2.6 kg
Safety class ...................................................................
• Due to our continuing programme of research and
development, the specifications herein are subject to
change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sawing of wood, plastic and
metal materials. As a result of the extensive accessory
and saw blade program, the tool can be used for many
purposes and is very well suited for curved or circular
cuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply.
They are double-insulated in accordance with European
Standard and can, therefore, also be used from sockets
without earth wire.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adher-
ence to jig saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
1. Hold power tools by insulated gripping sur-
faces, when performing an operation where
the cutting accessory may contact hidden
wiring or its own cord.
tacting a "live" wire may make exposed metal parts
of the power tool "live" and could give the operator
an electric shock.
6
Explanation of general view
11 Cutting line
12 Bolt
13 Graduation
14 Bevel slot
15 Gear housing
16 V-notch
17 Starting hole
18 Dust nozzle
19 Hose for vacuum cleaner
20 Rip fence
–1
) ........................................... 2,800
Cutting accessory con-
4350T
/II
2. Use clamps or another practical way to
secure and support the workpiece to a stable
platform.
body leaves it unstable and may lead to loss of con-
trol.
3. Always use safety glasses or goggles. Ordi-
nary eye or sun glasses are NOT safety
glasses.
4. Avoid cutting nails. Inspect workpiece for any
nails and remove them before operation.
5. Do not cut oversize workpiece.
6. Check for the proper clearance beyond the
workpiece before cutting so that the blade
will not strike the floor, workbench, etc.
7. Hold the tool firmly.
8. Make sure the blade is not contacting the
workpiece before the switch is turned on.
9. Keep hands away from moving parts.
10. Do not leave the tool running. Operate the
tool only when hand-held.
11. Always switch off and wait for the blade to
come to a complete stop before removing the
blade from the workpiece.
12. Do not touch the blade or the workpiece
GEB016-2
immediately after operation; they may be
extremely hot and could burn your skin.
13. Do not operate the tool at no-load unneces-
sarily.
14. Some material contains chemicals which may
be toxic. Take caution to prevent dust inhala-
tion and skin contact. Follow material sup-
plier safety data.
15. Always use the correct dust mask/respirator
for the material and application you are work-
ing with.
SAVE THESE INSTRUCTIONS.
21 Fence guide
22 Threaded knob
23 Circular guide pin
24 Rule bar
25 Screw
26 Guide rail adapter
27 Guide rail
28 Cover plate
29 Anti-splintering device
4350CT 4350FCT
26 mm 26 mm
135 mm 135 mm
10 mm 10 mm
20 mm 20 mm
800 – 2,800 800 – 2,800
236 mm 236 mm
2.6 kg 2.6 kg
/II /II
Holding the work by hand or against your