Components And Specifications - Model B (120V) - Integra Padget B Handbuch

Integra Padgett
®
Electric Dermatome Models B and PI

Components and Specifications - Model B (120V)

6
Specifications
Input: 120 V AC (50/60 Hz), 0.6 Amperes
Operating Conditions: -20 to 30ºC, Humidity 10% to 95% non-condensing, 500 to 1080 hPa
Storage and Transport Conditions: -40 to 55ºC, Humidity 10% to 95% non-condensing, 500 to 1080 hPa
Components
Catalog # Description
3539250 Model B Complete Kit, 120 volts
(Includes the following components)
DP0001 Model B Handpiece with Cord
DP0002 Power Supply, 120 Volts
35392550 Guard Plate
35392552 Width Clip, 2" (5.08 cm)
35392553 Width Clip, 3" (7.62 cm)
35392554 Width Clip, 4" (10.16 cm)
All components may be ordered separately.
USE ONLY INTEGRA PADGETT 4-INCH BLADES (3539252). FAILURE TO DO SO MAY CAUSE INJURY.
For product ordering information please call 800-654-2873 (USA) or 609-275-0500 (outside USA).
3
®
7
1
4
1.
2.
3.
4.
5.
6.
7.
3 2
5
Output: 12 VDC 4.0 Amperes
Catalog #
3539257
3539259
3539240
Accessories and Components
(To Be Ordered Separately):
35392551
3539256
3539252
Power Supply Wall Cord,
120 V AC
Power Supply Handpiece Cable,
12 V DC
Green "Ready" Light
Circuit Breaker, 1A Time-Delay
Twist-Lock Connector (Female)
Twist-Lock Plug (Male)
Handpiece (Applied Part)
Description
Dermatome Screwdriver
Pin Position Guide
Carrying Case, Plastic
Width Clip, 1" (2.54 cm)
Width Clip Screw (set of 2)
Blades, Sterile, Single Use, Box of 10