Technical Specifications - eta FALCO SMART Bedienungsanleitung

EN
Problem
02 Robot is stuck
while working
03 When cleaning
is not finished,
robot go back to
charging base for
charging.
04 Robot does not
clean according
to schedule time.
05 Remote control
is not working
(Effective control
range is 5
meters).

8. TECHNICAL SPECIFICATIONS

1 Rated Voltage
2 Battery
3 Working Hours
4 Specification
5 Weight
6 Battery Capacity
7 Dustbin Capacity
Reason
The machine is winding or
obstructing by scattered wire,
curtains, carpet on the ground
Low battery, robot automatically
go back for charging.
Wood floors, tiles and other
ground level, robot working
speed and time are different.
Robot is not powered on.
Low battery.
Robot is blocked with garbage.
Low battery of remote control.
Robot is not powered on/ Low
battery of robot.
Remote control infrared
mission or robot receiver
get dirty, unable to launch or
receive signals.
There is signal interference
near the robot that produces
infrared rays.
Rechargeable battery DC 14.4 V; 2600 mAh,
Li-Ion (the charge time is 5 hours)
about 90-120 mins
330 x 78 mm (including the wheel height)
4.6 kg (2,55 only the unit of cleaner)
2400 mAh
600 ml
EN - 78
Solutions
Robot will automatically try a
variety of ways to get rid of
trouble. If it cannot, please
manually help
To charge the robot.
The working hours of
robot vary according to the
complexity of the room, the
amount of trash, and the
cleaning mode.
Turn on the power switch.
When robot is on standby,
make sure it is charged so
that it has enough power to
work at any time.
Turn off the power and clean
the dust bin, and other parts.
Replace with new battery and
install it correctly.
Ensure power switch is turned
on and robot has enough
power.
Clean the remote control
infrared emission or robot
receiver with cotton cloth.
Avoid using the remote
control near other infrared
devices.
14.4 V