Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
en - Original instructions
4. Position the pieces of wood.
The wood pieces prevent the extension from moving during backfilling.
4.2.7 Install the extension: P-installation
Use a cutting device to adjust the length of the extension and extension guide bars.
5
6
7
8
9
1. Adjust the length of the extension by cutting an O-ring slot.
2. Put the O-ring in the second O-ring slot.
Put soap water or grease on the O-ring before the extension is assembled.
3. Install the extension guide bars:
a) Cut the extension guide bars to the correct length.
b) Put the extension guide bars on top of the station guide bar bracket.
4. Assemble the extension:
26
1
2
1
1. Extension cut
2. Minimum 200 mm (7.87 in), maximum 250 mm (9.8 in)
3. Pieces of wood
4. Hooks
4
5. Extension guide bar bracket
6. Second O-ring slot
7. Extension guide bars
3
8. Station guide bar bracket
9. Station guide bars
2
1
WS011668C
1. Hook for level regulator
2. Hook for chains
1
Quicklinks ausblenden:
Werbung
Inhaltsverzeichnis
