Product Selection and Project Engineering
EN
5
Product Selection and Project Engineering
EN
Install and adjust the cabinet in such a way that it is always operated within the
EN
permissible temperature range.
EN
Carefully observe the "Cabinet installation guide".
EN
EN
6
Mounting and Installation
EN
6.1
Mounting / Dismounting
EN
Mount the device carefully and only in accordance with the safety notes
EN
(see Chapter "Safety").
EN
Read through the following installation conditions and assembly instructions carefully and
EN
follow them precisely.
EN
6.1.1 Operating Position
EN
The operating position is optional.
EN
6.1.2 Mounting / Dismounting pac-Bus
EN
The pac-Bus is an accessory which facilitates wiring of the auxiliary power and reading out
of the collective error message.
EN
EN
The components for the pac-Bus Type 9194 must be ordered separately.
EN
EN
Mounting
EN
EN
EN
EN
EN
EN
Connect the required
number of pac-Bus
elements.
Dismounting
Proceed in the reverse order to mounting.
8
Vibration Transducer Supply Unit
Series 9147
07392E00
Engage the pac-Bus
elements on the DIN rail.
07391E00
Connect the terminal
set at the beginning and
at the end.
213097 / 914760310010
2020-05-18·BA00·III·en·08
15551E00