Krups ESPRESSERIA AUTOMATIC EA 80-Serie Handbuch Seite 64

KRUPS Espresseria Automatic
Preparation of a cappuccino or a caffe latte with the auto-cappuccino accessory
Press the Steam button (5).
The machine preheats. A message invites
you to place a recipient underneath the
steam nozzle.
Place a cappuccino cup underneath the
special nozzle and press the Steam but-
ton.
As soon as steam production is started,
the remaining production time is displayed
in seconds on the screen. Two options are
available :
A) You can increase or reduce the time
displayed with the knob and wait until the
steam production stops automatically.
B) You can stop the steam production at
any time by pressing the Steam button.
Remove the cappuccino cup and place it
underneath coffee outlet.
Add an espresso following the instruc-
tions described in point 4.2.
Remove the cup and add a little sugar or
chocolate shavings to your taste.
We recommend cleaning the special noz-
zle immediately after every use to avoid
milk drying inside.
Remove the nozzle (see illustration) and
clean the parts with a small brush and
washing up liquid if required.
If required, unblock the small opening (cir-
cled on the illustration) with the cleaning
wire (supplied with your machine).
24
Use and maintenance / SERIE EA 80xx
!
Important : the production of steam does
not stop immediately after pressing the
Steam button.
Press the button early enough to avoid
overflows.
!
Note : To prepare a caffe latte, turn the
central section of the special nozzle 180°
(see above).