Mounting / Dismounting, Operating Position - Stahl SolConeX 8570/11-Serie Betriebsanleitung

Mounting and installation
EN
7.2

Mounting / dismounting, operating position

EN
EN
7.2.1 Assembly
This device is suitable for outdoor and indoor use.
EN
• Provide a protective roof or wall if the enclosure and explosion-protected electrical
EN
equipment are used outdoors.
EN
Operating position
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Fasten the wall-mounting socket by means of four screws in the vertical operating
EN
position on an even wall.
EN
EN
EN
EN
EN
Mounting auxiliary contacts
EN
EN
12
Downloaded from www.Manualslib.com
19605E00
The fastening holes are designed as elongated holes. This allows vertical and
horizontal adjustment during mounting.
SolConeX Wall-Mounted Socket, 16 A
Series 8570/11
manuals search engine
• Hinged cover facing downwards, connection
chamber facing upwards.
11203E00
• Open the enclosure.
• Snap the auxiliary
contacts into place
optionally in the left-hand
or right-hand seat. Double
equipping is possible.
• Close the enclosure.
150646 / 8570601300
2017-07-19·BA00·III·en·07