Mounting / Dismounting, Operating Position - Stahl SolConeX 8570/11 Serie Betriebsanleitung

Mounting and installation
EN
7.2

Mounting / dismounting, operating position

EN
EN
7.2.1 Assembly
This device is suitable for outdoor and indoor use.
EN
• Provide a protective roof or wall if the enclosure and explosion-protected electrical
EN
equipment are used outdoors.
EN
Operating position
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
EN
• Fasten the wall-mounting socket by means of four screws in the vertical operating
EN
position on an even wall.
EN
EN
EN
EN
EN
Mounting auxiliary contacts
EN
EN
12
SolConeX Wall-Mounted Socket, 16 A
Series 8570/11
All manuals and user guides at all-guides.com
19605E00
The fastening holes are designed as elongated holes. This allows vertical and
horizontal adjustment during mounting.
• Hinged cover facing downwards, connection
chamber facing upwards.
11203E00
• Open the enclosure.
• Snap the auxiliary
contacts into place
optionally in the left-hand
or right-hand seat. Double
equipping is possible.
• Close the enclosure.
150646 / 8570601300
2017-07-19·BA00·III·en·07