Maintenance/Cleaning
4.2.2.2 Dismantle piston unit (1000 µl MC8)
Decouple the Liquid End
Remove shaft fastening
Dismantle shaft and piston
82
Operating manual English
a. Decouple the Liquid End
b. Pull out sliding clamps of the housing cover laterally and
remove the housing.
a. Pull out the shaft fastening laterally
a. Carefully press the shaft out forward. Take the piston di-
rectly with you and slowly pull it out of the holder.
b. To re-grease, pull the piston out of the shaft. Only all pis-
ton-shaft units of a Liquid End the can be replaced.
Liquid Handling Station 9974 96