Operation; Mode Of Operation; Maintenance And Environmental Protection - MEISTER CRAFT MSB 710 E Originalbetriebsanleitung

5452160-Schlagbohr-man 15.01.14 09:26 Seite 36
Percussion device/right or left-hand
rotation
Setting as illustrated with motor
off.
Impact Drilling
IMPORTANT! Do not change
drilling direction when the drill is
in rotation; wait until the drill has come
to stop. The chucks of reversible drills
are always fixed by a screw with a left
hand thread. This screw must be
loosend before the drill chuck can be
removed and is accessible through the
front of the chuck. To loosen a screw
with a left hand thread, turn in a
clockwise direction.
8 – Operation
Switching on/off
Insert the plug in a 230–240 V~ socket.
IMPORTANT! Always switch the
motor on before contacting the
material.
Switching on
Press the On-Off switch (5) carefully.
The machine starts. The number of revs
per minute varies according to the
pressure on the switch.
Switching off
Release the On-Off switch and wait until
the machine stops.
36
Drilling
Reverse
Forward
Switching on continuous mode
Press the On-Off switch and hold. Press
the locking button (3). Release the On-
Off switch. The machine runs at the
speed selected.
Switching off continuous mode
Press the On-Off switch. The locking
button unlocks. Release the On-Off
switch and wait until the machine stops.
9 – Mode of operation
Drilling in wood and metal
Never use the impact feature when
drilling in wood or metal. The impact
drilling switch must be positioned on
"Drilling". The reversing switch must be
set to "Forward". The speed is
controlled by pressing the trigger.
Preselection of speed (5).
Drilling in concrete
Turn impact drilling switch on the position
"Impact Drilling". Set reversing switch to
"Forward". Start with a slow speed.
10 – Maintenance and
environmental protection
Care
Clean the housing only with a damp
cloth – do not use any solvents! Dry
thoroughly afterwards.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be