Before First Use; Connecting The Mains Adapter To The Mains Power Supply; Inserting / Replacing Batteries - Silvercrest SDRF 10 B1 Bedienungs- Und Sicherheitshinweise

Risk of product damage
Only use the specified battery type!
Insert the batteries according to the polarity marking (+) and (-)
on the battery and the product.
Clean the contacts on the battery and inside the battery compart-
ment before inserting!
Immediately remove drained batteries from the product.

Before first use

Note: Remove all packaging materials from the product.
Note: You can power the product using the included mains adapter
or using batteries.
Connecting the mains adapter to the mains
power supply
Note: Before connecting the mains adapter
supply, compare the connection information on the type plate of the
mains adapter
15
your electricity supply. Make sure the information matches to prevent
product damage.
Connect the coaxial power connector
with the mains adapter port
15
product.
Plug the power supply
connect the product to the mains.

Inserting / replacing batteries

Remove the battery cover to open the battery compartment
the back of the product. If applicable, remove the used batteries.
64 GB/MT
(voltage and frequency) with the information for
into a properly installed mains socket to
15
to the mains power
15
of the mains adapter
16
on the right side of the
5
15
at
6