Setting The Alarm / Snooze - Silvercrest SDRF 10 B1 Bedienungs- Und Sicherheitshinweise

Turn the jog dial control element
settings in the menu. Press the jog dial control element
firm.
In system settings, select the "sleep" function by pressing the jog
dial control element
Turn the jog dial control element
the available sleep timer options (Off, 15, 30, 45, 60, 90 and
120 minutes).
Confirm by pressing the jog dial control element
Note: The sleep timer symbol
left of the colour LCD
until the product switches off.
To stop the sleep timer early, press and hold the Menu / Info button
to open the menu options. Turn the jog dial control element
9
left or right to switch to system settings. Press the jog dial control
element to confirm
In system settings, select the "sleep" function by pressing the jog
dial control element
Turn the jog dial control element
the available sleep timer options. Select the "OFF" option by
pressing the jog dial control element

Setting the alarm / Snooze

The product has a dual alarm, i.e. you can set two different alarm times.
First verify the clock is correct on the product as described in chapter
"Setting the clock".
Note: The alarm can only be used on mains power.
Press the button
Alarm 1 or Alarm 2.
Confirm your selection by pressing the jog dial control element
13
to confirm.
13
13
which appears in the bottom
1e
shows the number of minutes remaining
1
.
13
to confirm.
13
13
and select one of the two alarm functions:
10
left or right to switch to system
left or right to scroll through
again.
13
left or right to scroll through
to confirm.
13
to con-
13
13
.
13
GB/MT 83