Before Use; Check The Package Contents; Disposal Of Packaging Materials; Set-Up Location Requirements - Silvercrest SKR 800 A1 Bedienungsanleitung

Before use

Check the package contents

♦ Remove all parts of the device and the operating instructions from the box.
♦ Remove all packaging material.
The package contents include the following components:
▯ Kitchen Radio SKR 800 A1
▯ Mounting plate
▯ 4 x spacers
▯ 4 mounting screws (long)
▯ 4 mounting screws (short)
▯ These operating instructions
NOTE
► Check the package for completeness and for signs of visible damage.
► If any items are missing or damaged as a result of defective packaging or insufficient
care during transportation, contact the Service hotline (see the section Service).

Disposal of packaging materials

The packaging protects the device from damage during carriage. The packaging materials
have been selected for their environmental friendliness and ease of disposal, and are
therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste which is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTE
► If possible, keep the device's original packaging for the warranty period so that the
device can be packed properly for return shipment in the event of a warranty claim.

Set-up location requirements

For safe and trouble-free operation of the device, the set-up location must fulfil the following
requirements:
■ When setting it up, place the device on a firm, flat and horizontal surface. Use the
fold-out stand.
■ The surfaces of some items of furniture might contain components that can corrode
and soften the rubber feet of the device. If necessary, place a cover under the
device's rubber feet.
■ Set up or mount the device in such a way that the ventilation openings and the
speaker are not covered.
SKR 800 A1
(pre-assembled)
4
14
15
16
17
GB
7