Getting To Know Your Appliance; The Control Panel; The Hotplates - CONSTRUCTA CA4.12-Serie Gebrauchs- Und Montageanleitung

Absence of pan or unsuitable size
If no pan is placed on the selected hotplate, or if it is made of
unsuitable material or is not the correct size, the power level
displayed on the hotplate indicator will flash. Place a suitable
pan on the hotplate to stop the flashing. If this takes more than
90 seconds, the hotplate will switch off automatically.
Empty pans or those with a thin base
Do not heat empty pans, nor use pans with a thin base. The
hob is equipped with an internal safety system. However, an
empty pan may heat up so quickly that the "automatic switch

Getting to know your appliance

The instruction manual is the same for various different hobs.
An overview of the models with their dimensions is given on
page 2.

The control panel

Control panels
Main switch
#
Selecting the hotplate
$
Selecting settings
A/@
Powerboost function
›
Time program function
3
Childproof lock
‚

The hotplates

Hotplate
$ Single hotplate
Use only cookware suitable for induction cooking; see the section on suitable cookware.
off" function may not have time to react and the pan may reach
very high temperatures. The base of the pan could melt and
damage the glass on the hob. In this case, do not touch the
pan and switch the hotplate off. If it fails to work after it has
cooled down, please contact the Technical Assistance Service.
Pan detection
Each hotplate has a minimum limit for detecting pans, which
varies depending on the material of the pan being used. You
should therefore use the hotplate that is most suitable for the
diameter of your pan.
Indicators
‹
‚-Š
›
•/œ
‹‹
Control panels
Pressing a symbol activates its corresponding function.
Note: Always keep the control surfaces dry. Moisture can affect
proper working.
Turning on and off
Always use cookware of a suitable size.
Functionality
Power levels
Powerboost function
Residual heat
Time program function
43