Cleaning
ATTENTION! PROPERTY DAMAGE!
►
Do not use aggressive, chemical or abrasive cleaning agents. These could
damage the outer surfaces of the appliance.
Emptying the dirt container and cleaning the filter
NOTE
►
To achieve the best results, empty the dirt container
filter
1) If you have not already done so, disconnect the appliance from the mains
adapter
2) To open the dirt container
dirt container
3) Remove the filter holder
container
4) Empty the dirt container
5) Remove the HEPA filter
towards the
6) Tap out the HEPA filter
essary, you can rinse out the filter holder
water. Before replacing the parts ensure that they are completely dry. Do not
dry the HEPA filter
7) Reinsert the filter holder
holder
8) Insert the HEPA filter
HEPA filter
The arrow on the HEPA filter
holder
9) Replace the dirt container
–
First, place the contacts on the underside of the dirt container
contact pins on the underside of the motor unit
catches on the motor unit
–
Press the upper side of the dirt container
motor unit
now firmly seated on the motor unit
SAST 18 A1
regularly.
or lift it off the wall bracket
, press the release button
from the appliance.
together with the HEPA filter
by pulling both straight out of the dirt container
.
from the filter holder
symbol and pulling it out.
and the filter holder
with hot air.
into the dirt container
is straight and that the rubber lip seals the dirt container
into the filter holder
fit into the corresponding recesses on the filter holder
. Turn the HEPA filter
on the motor unit
so that the catch audibly engages. The dirt container
.
by turning it anticlockwise
over a rubbish bin. If nec-
and the HEPA filter
. Make sure that the filter
so that the catches on the
must be aligned with the arrow on the filter
clockwise towards the
:
. This pushes the two
into the recesses on the dirt container
against the upper side of the
.
GB │ IE │ NI │ CY
and clean the HEPA
and remove the
from the dirt
.
with fresh
.
.
symbol.
onto the
.
is
│
13
■