Specifications; Conformity Information - Megasat HD 200 C V2 Bedienungsanleitung

7. Specifications

Processor
Chipset Powerful dual MIPS CPU
SDRAM 512 MB DDR-2
Flash memory 32 MB
Processor 552 MHz
Tuner & Demodulator
RF input 1x IEC-TYPE, IEC169-2, female
Frequency range 114 ~ 858 MHz
Bandwidth 8 MHz
Input impedance 75 Ω
Noise figure 2.9 dB
Decoding
Video decoding MPEG4 AVC/H.265 HP@L4 / MPEG2 MP@ML.HL
Aspect ratio 4:3 / 16:9
Video output SCART, HDMI (576i, 576p, 720p, 1080i, 1080p)
Demodulation 256 QAM, 128 QAM, 64 QAM, 32 QAM, 16 QAM
Audio decoding MPEG-1 (Layer 1 & 2)
Audio mode Single Channel / Dual Channel / Joint stereo / Stereo
Sampling 32, 44.1 und 48 KHz
Connections
Tuner 1x Antenna input / 1x Antenna output
Data connection 1x USB (Front side)
Scart 1x to the television
HDMI 1x HDMI output
S/PDIF 1x Digital audio output
Power supply
Power supply AC 220~240 V, 50/60Hz // DC 12 V, 1A
Power consumption max. 6 W (in use) / < 0,5 W (standby)
Other
Dimensions (W/D/D) 168 x 38 x 93 mm
Weight 234 g
Note:
Weight and dimensions are not the absolute exact values.
Technical details can be changed at any time and without prior notice.
22 ENGLISH

Conformity information

Megasat Werke GmbH hereby declares that the following device is in compliance with the essential
requirements and other relevant provisions of Directives 2014/30/EU (EMC), 2014/35/EU (LVD)
and 2014/53/EU (RED):
Megasat HD 200 C V2 (Art-No. 0201142)
The declaration of conformity for this product is available from:
Megasat Werke GmbH, Industriestraße 4a, D-97618 Niederlauer
You can download the declaration of conformity from our homepage:
www.megasat.tv/support/downloads
Notes
ENGLISH 23