Network; Troubleshooting - Megasat HD 200 C V2 Bedienungsanleitung

5. Main menu

5.8 Network

In this menu item you can connect the recei-
ver to your network. Afterwards you can use
various internet apps.
Note:
The connection to the network can only
be made with a suitable WiFi USB stick.
This is not included in the delivery.
Suitable WiFi USB stick must include the RT5370 chipset!
20 ENGLISH

6. Troubleshooting

If you have problems with the receiver, please check the following situations to determine the
source of the error:
Problem Possible causes
LED does not light up on the Power cable is not connected. Check that the power cable is
front.
Bad or jerky picture. DVB-C reception may be too
weak.
No picture when starting the The receiver is connected
receiver. via HDMI, but the TV is not in
proper HDMI mode.
The remote control does not The batteries are low or the
work. remote control is not pointing
exactly at the receiver.
You have forgotten your pass-
word?
What must you do?
connected correctly.
Make sure that the coaxial
cable is connected correctly
and that it is not damaged. If
not, please contact your cable
provider to check whether
there may be a fault in the
network.
Switch the television to the
correct HDMI mode (e.g.
HDMI 1).
Replace the batteries. Make
sure that there is nothing
between the receiver and the
remote control. Obstacles
may reduce reception.
The default password is 0000.
Contact your dealer if you
have forgotten the password
you assigned yourself.
ENGLISH 21