Dhcp-Server Pool Modify - Hirschmann MSP40 Referenzhandbuch

Dynamic Host Configuration Protocol (DHCP)
16.2 dhcp-server
16.2.3

dhcp-server pool modify

Modify the dynamic address pool

Mode: Global Config Mode

Privilege Level: Operator

Format: dhcp-server pool modify <-1> mode interface <-2> mac <-3> clientid
<-4> remoteid <-5> circuitid <-6> relay <-7> vlan <-8> leasetime <-9>
option configpath <-10> gateway <-11> netmask <-12> wins <-13> dns <-14>
hostname <-15> hhrschsancsashanhh-device
mode: Pool mode settings.
interface: Interface mode.
mac: MAC mode.
clientid: Clientid mode.
remoteid: Remoteid mode.
circuitid: Circuitid mode.
relay: Relay mode.
vlan: VLAN mode.
leasetime: Enter the leasetime in seconds.
option: Configuration option.
configpath: Configpath in 'tftp://<servername>/<file>' format.
gateway: Default gateway.
netmask: Option netmask.
wins: Option wins.
dns: Option dns.
hostname: Option hostname.
hhrschsancsashanhh-device: Set this pool to HHrschsancsashasnHH devices only.
Paramete Value
r
1..128
P-1
slot no./port no.
P-2
none
P-3
aa:bb:cc:dd:ee:ff
none
P-4
xx:xx:...:xx
none
P-5
xx:xx:...:xx
none
P-6
xx:xx:...:xx
P-7 none
ipaddr
P-8 -1..4042
infinite
P-9
seconds
tftp://s
P-10
A.B.C.D
P-11
a.b.c.d
P-12
A.B.C.D
P-13
A.B.C.D
P-14
string
P-15
164
Meaning
Pool ID.
Remove MAC mode.
MAC address.
Remove ID mode.
Enter ID in hexadecimal format.
Remove ID mode.
Enter ID in hexadecimal format.
Remove ID mode.
Enter ID in hexadecimal format.
Remove relay mode.
Enter IP address of the relay.
VLAN ID. A value of -1 corresponds to management vlan (the
default), any other value (1-4042) represents a specific VLAN
Infinite leasetime.
Leasetime in seconds.
tftp://<servername>/<file>
("") to clear value.
IP address.
IP subnet mask.
IP address.
IP address.
Enter a user-defined text, max. 64 characters.
Configuration path; empty string
RM CLI HiOS-2A MSP40
Release 6.1 09/2016