Security-Status Monitor Snmp-Unsecure - Hirschmann MSP40 Referenzhandbuch

15.1.8 security-status monitor http-enabled
Sets the monitoring of the activation of http on the switch.

Mode: Global Config Mode

Privilege Level: Administrator

Format: security-status monitor http-enabled

no security-status monitor http-enabled
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no security-status monitor http-enabled
15.1.9

security-status monitor snmp-unsecure

Sets the monitoring of SNMP security\n(SNMP v1/v2 is enabled or v3 encryption is disabled).

Mode: Global Config Mode

Privilege Level: Administrator

Format: security-status monitor snmp-unsecure

no security-status monitor snmp-unsecure
Disable the option

Mode: Global Config Mode

Privilege Level: Administrator

Format: no security-status monitor snmp-unsecure
15.1.10 security-status monitor sysmon-enabled
Sets the monitoring of the activation of System Monitor 1 on the switch.

Mode: Global Config Mode

Privilege Level: Administrator

Format: security-status monitor sysmon-enabled
RM CLI HiOS-2A MSP40
Release 6.1 09/2016
Device Security
15.1 security-status
151