Hirschmann MSP40 Referenzhandbuch Seite 487

Access Control List (ACL)
3.3 ip
Paramete Value
r
domain
P-4
echo
ftp
ftpdata
http
smtp
snmp
telnet
tftp
www
1-65535
P-5 any
a.b.c.d-e.f.g.h
P-6 eq
neq
lt
gt
domain
P-7
echo
ftp
ftpdata
http
smtp
snmp
telnet
tftp
www
1-65535
icmp
P-8
igmp
ip-in-ip
tcp
udp
ip
1-255
-fin
P-9
+fin
-syn
P-10
+syn
-rst
P-11
+rst
-psh
P-12
+psh
-ack
P-13
+ack
P-14 -urg
+urg
P-15 established
0..255
P-16
0..255
P-17
0..255
P-18
0..7
P-19
string
P-20
0..7
P-21
0..255
P-22
56
Meaning
Domain
Echo
FTP
FTP Data
HTTP
SMTP
SNMP
Telnet
TFTP
WWW
Port number
Enter for any destination ip address and mask.
Destination IP address and mask (mask in wild-card notation) e.g
192.168.1.1-0.0.0.255.
Specify value that port number must be equal to.
Specify value that port number must not be equal to.
Specify value that port number must be less than.
Specify value that port number must be greater than.
Domain
Echo
FTP
FTP Data
HTTP
SMTP
SNMP
Telnet
TFTP
WWW
Port number
ICMP
IGMP
IP-in-IP
TCP
UDP
Any IP protocol
Protocol number
Match occurs if fin flag is not set in the TCP header.
Match occurs if fin flag is set in the TCP header.
Match occurs if syn flag is not set in the TCP header.
Match occurs if syn flag is set in the TCP header.
Match occurs if rst flag is not set in the TCP header.
Match occurs if rst flag is set in the TCP header.
Match occurs if psh flag is not set in the TCP header.
Match occurs if psh flag is set in the TCP header.
Match occurs if ack flag is not set in the TCP header.
Match occurs if ack flag is set in the TCP header.
Match occurs if urg flag is not set in the TCP header.
Match occurs if urg flag is set in the TCP header.
Match occurs if the specified RST and ACK bits are set in TCP
header.
ICMP type value.
ICMP code value.
IGMP code value.
IP Precedence
<name> Time-range name
User priority (VLAN priority).
TOS
RM CLI HiOS-2A MSP40
Release 6.1 09/2016