Cleaning And Storage; Troubleshooting - Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise

In the "Profile" menu, click "Share your robot".
Select your robot. The app will then show the
QR code and the user can scan the QR code
to be able to control the robot vacuum cleaner.
The other user must now open the "Profile" menu
and click "Scan QR-Code".
Use a different mobile to scan in the code and
be able to control the robot vacuum cleaner.
Feedback
In the "Profile" menu, click "Feedback".
Enter your e-mail address and select your robot
model from the drop-down menu. Describe your
problem. You may also upload pictures. Then
submit the message.
Operation via app / Cleaning and storage / Troubleshooting

Cleaning and storage

Set the power switch
ing the product.
Unplug the mains lead
before cleaning the product.
Do not rinse the product directly with water.
Do not wipe the product with a cloth soaked
in water.
Disconnect the power supply if the product will
not be used for an extended period.
Cleaning the dust collector
Remove and empty the dust collector
Remove the filters
6
can be cleaned by tapping. Do not wash it with
water.
Rinse the dust collector
Keep the dust collector
Cleaning the brushes
Remove the main brush
hair or dirt.
Remove the side brushes
hair or dirt.
Cleaning the main housing
Clean the front castor
tangled in it.
Clean the anti-drop sensor
sensitivity.
Clean the anti-collision sensor
its sensitivity.
Cleaning the charging dock
Clean the charging contacts
of the robot vacuum cleaner and the charging
dock with a dry cloth.

Troubleshooting

If the product is not working correctly, the display
will show various error codes and emit different length
beeps. Please refer to the table below for trouble-
shooting
to "O" before clean-
10
from the mains socket
4
.
18
, , . The HEPA filter
26 27
and the main filter
18
and accessories dry.
18
and clean off any
20
and remove any
21
to remove any hair
23
to maintain its
22
to maintain
24
on the underside
3
GB/MT
6
.
26
1
109