Silvercrest SSRA1 Bedienungs- Und Sicherheitshinweise Seite 45

Choose a WIFI network with a strong signal from
your smartphone settings to connect your product.
Verify your WIFI network allows devices.
Switch the power switch
vacuum cleaner to "-".
Hold the "Spot mode / Decrease time" button
on the robot vacuum cleaner approx. 5 seconds
until you hear a beep.
The robot vacuum cleaner will switch to WIFI
setup mode and the network indicator will blink.
In the "Robot" menu click "Add new robot" or
to add the robot vacuum cleaner.
Select robot model "SSRA1".
Enter your WIFI password and click "Connect-
ing" to connect to the WIFI network. The robot
vacuum cleaner should connect to the WIFI
network after a short time.
Note: If unable to connect to WIFI, restart the robot
vacuum cleaner and try to connect again. You can
alternatively use option 2 to connect.
on the robot
10
16
Option 2
Hold the "Spot mode / Decrease time" button
on the robot vacuum cleaner for approx. 8
seconds until you hear two beeps.
In the "Robot" menu click "Add new robot" or
to add the robot vacuum cleaner.
Select robot model "SSRA1".
Click "Can't connect? Click here" to use the
network configuration.
Android:
In the "Choose robot hotspot" menu click "Please
choose" and select the hotspot "Robot-XXXX"
from the pop-up list.
In the "Choose WIFI" menu, click "Please
choose". Select your WIFI network and enter
the password.
Operation via app
16
GB/MT 101