Electrics; Initial Operation - Kessel Minilift F Anleitung Für Einbau, Bedienung Und Wartung

5.3.

Electrics

Risk of electrocution!
Improper use of electricity can be fatal! All pumps with free cable ends must be connected by a qualified electrician.
A professional inspection prior to initial operation must ensure that the required electrical protection measures
exist. Grounding, zeroing, isolating transformer, fault current or earth leakage circuit breaker must comply with the
regulations of the responsible power station.
The voltage specified in the technical data must correspond with the local power supply.
Ensure that the electrical plug connections are located in a flood-proof area and are protected from moisture.
Power cords and plugs must be checked for damage before use.
The end of the connector cable must not be submerged in water, otherwise water can get into the motor terminal
compartment.
The electrical connection must be made in accordance with the local regulations of the EVU or VDE. The supply
voltage and frequency are indicated on the nameplate of the pump and the switching device. The voltage toleran-
ce must be between 6% to -10% of the supply voltage. It is important to ensure that the data provided on the
nameplate corresponds with the existing power supply. The lifting systems require no further motor protection.
The device is connected to the mains via the shockproof plug.
5.4.

Initial operation

Never allow the pump to run dry for a prolonged period of time (risk of overheating).
Plug the power cord into a grounded outlet; the lifting system is now ready for use. The pump starts working as
soon as the water level has reached the starting level in the collection container. Once the water level reaches the
stop level, the pump switches off.
INSTALLATION AND START-UP
36/120 2016/04