Introduction; Proper Use; Features; Accessories - Parkside PWS 1200 Bedienungs- Und Sicherheitshinweise

PWS 1200 Angle grinder
For grinding, roughing, cutting and polishing
Dear Customer! Please make sure you familiarise yourself fully with the way the equipment works
before you use it for the first time and that you understand how to handle electrical power tools
correctly. Please read the operating instructions
safety advice carefully. Use the equipment only as described and for the indicated purposes.
By doing this you will be able to work in complete safety and produce better results.

Proper use

The angle grinder is intended for the dry cutting of metal and stone. Any other use or modification
shall be deemed improper use and could give rise to considerable dangers. The manufacturer will
not accept liability for loss or damage arising from improper use. The tool is not intended for
commercial use.
Features of the PARKSIDE PWS 1200
Spindle lock
Auxiliary handle
Locking button
Handle with softzone grip
ON / OFF switch

Accessories

· Carbon brushes
· Auxiliary handle
· Cutting disc

Technical information

Nominal power:
Nominal voltage:
Design no-load speed:
Spindle:
Sound pressure level:
Sound power level:
Vibration:
Protection class:
Weight:
below and the accompanying
1200 W
230 V ~ 50 Hz
n – 11,000/min
o
14 mm
dB(A) (to EN 50144)
dB(A) (to EN 50144)
2
< 2.5 m/s (to EN 50144)
II
2.5 kg
Adjustable safety guard
Clamping flange
Speed control wheel (Fig. A)
Clamping nut (Fig. B)
Wrench (Fig. C)
· Spanner
· Disc guard cover

Introduction

GB 13
PARKSIDE